November 6 – 8, 2016, Orlando, Florida

PAST CONFERENCE PROCEEDINGS


ENG

Engineering Division Chairs:

Adam Lewis (Division Chair) Athens State University
Ravindra Thamma (Division Chair) Central Connecticut State University
Rami Haddad (Chair—Electrical) Georgia Southern University
Akram Abu-aisheh (co-chair—Electrical) University of Hartford
Tom Nicholas (Chair—Construction) University of North Carolina-Charlotte
Alex Sergeyev (Chair—Aerospace) Michigan Technological University

——————————————————————————–

ENG 201:
Topics in Electrical Grid Technologies
Session Chair: Rex Kanu (Purdue University)
Time and Place: Monday, November 7, 2016, 8:30—10:15am Cypress 4

Abstract #087
Distributed Generation Systems Modeling and Simulation Visual Library
Adel El Shahat, Georgia Southern University; Rami Haddad, Georgia Southern University; Youakim Kalaani, Georgia Southern University

Paper #089
High-Speed PM Generator for Optimized Sizing Based on Particle Swarm for Smart Grids
Adel El Shahat, Georgia Southern University; Rami Haddad, Georgia Southern University; Youakim Kalaani, Georgia Southern University

Paper #095
Battery Energy Storage for a Low-Voltage DC Microgrid System
Dale Litwhiler, Penn State University; Nicholas Batt, Ecoult; Jason Hoffman, Ecoult

Paper #145
Measured and Simulated Performance of a Grid-Connected PV System in a Humid Subtropical Climate
Fredericka Brown, The University of Texas at Tyler; Raquel Lovelace, The University of Texas at Tyler; Harmonie Hawley, The University of Texas at Tyler

Paper #161
Smart Charging Management System of Plugged-in EVs Based on User Driving Patterns in Micro-Grids
Ali Ameli, University of Paderborn, (GERMANY); Stefan Krauter, University of Paderborn, (GERMANY); Mohammad Taghi Ameli, Shahid Beheshti University (IRAN); Saeid Moslehpour, Hartford University


ENG 202:
Topics in Electronics
Session Chairs: Dale Rowe (Brigham Young University)
Time and Place: Monday, November 7, 2016, 10:30—12:30pm Cypress 4

INVITED SPEAKER #159
Using LIDAR and Animation to Develop Surveillance Strategies
Roger Ruggles, Lafayette College; Karen Ruggles, DeSales University

Paper #008
Exploring the Use of Nanoparticles to Modify the Surface Energy of Polyethylene (PE) Substrates
Rex Kanu, Purdue University; Thomas Spotts, Ball State University

Paper #070
Designing Stand-Alone Microgrid Hybrid Solar/Wind Energy Systems and Grid-Connected Smartgrid Hybrid Solar/Wind Energy Systems
Dominick Lauria, University of Hartford; Sarah Lamb, University of Hartford

Paper #127
Design Optimization of 10Gbps Optical Telecommunications Receivers
Akram Abu-aisheh, University of Hartford

Paper #166
Geometrical Determination of Maximum Power Point of a Photovoltaic Cell
Mehmet Goksu, Millersville University of Pennsylvania; Faruk Yildiz, Sam Houston State University


ENG 203:
Topics in Solar and Geothermal Energies
Session Chair: Eric Dietz (Purdue University)
Time and Place: Monday, November 7, 2016, 8:30—10:15am Cypress 3

Paper #006
Feasibility of Using an Augmenting Solar Thermal System for a Greenhouse in NW Ohio
Sudershan Jetley, Bowling Green State University; Binisha Shrestha, Bowling Green State University

Paper #027
Design and Development of Mobile Geothermal Laboratory Equipment
Faruk Yildiz, Sam Houston State University; Keith Coogler, Sam Houston State University

Paper #150
Development of a Solar Thermal Water Management System (STWMS): An Undergraduate Research Experience
Steve Ngwira, Nissan; Nathan Frazier, UPS; Kendal Lewis, Aisin Automotive Casting (TN); Priyam Patel, Akebono Brake Corporation; Ahmed ElSawy, Tennessee Technological University

Paper #155
Development of Combined Concentrated Photovoltaic and Fluidic Thermal Extraction for Harnessing the Sun Energy—Undergraduate Research Experience
Michael Kronland, Fastenal (GA); Nicholas Leak, Aphena Pharma Solution, Inc.; Joseph Randall, Eastman Chemical Company; Cory Womack, Tennessee Technological University; Ahmed Elsawy, Tennessee Technological University

Abstract #165
Renewable Energy Education Initiative for K-12 Teachers with Sustainable Energy Education Network
Faruk Yildiz, Sam Houston State University; Robert Lane, Sam Houston State University; Doug Ullrich, Sam Houston State University


ENG 204:
Topics in Wind Technologies
Session Chair: Mohan Devgun (Buffalo State University)
Time and Place: Monday, November 7, 2016, 10:30—12:30pm Cypress 3

Paper #038
Comparative Study of Various Custom-Constructed Wind Augmentation Shrouds for Optimal Design
Ulan Dakeev, Texas A&M University-Kingsville; Farzin Heidari, Texas A&M University-Kingsville; Mohammad Bijapur, Texas A&M University-Kingsville; Sumanth Yanamala, Texas A&M University-Kingsville

Paper #146
Analysis of a Custom Constructed Wind Augmentation Device with 30-Degree Inlet Section to Improve Wind Power Generation
Ulan Dakeev, Texas A&M University-Kingsville; Farzin Heidari, Texas A&M University-Kingsville; Bhavana Kashibhatla, Texas A&M University-Kingsville

Paper #160
The Value of Electricity Storage in the Presence of Renewable Energy Sources in the Future of Multi-Vector Energy Systems
Hossein Ameli, Imperial College London (UK); Meysam Qadrdan, University of Cardiff (UK); Goran Strbac, University of Cardiff (UK); Mohammad Ameli, Shahid Beheshti University (IRAN); Saeid Moslehpour, Hartford University

Paper #163
SWOT Analysis for Iran’s Wind Farms
Akbar Adibfar, MAPNA Renewable Energies Co.

Paper #164
Short-Term Forecasting of Wind Power Generation by Adaptive Neural Networks
Hong Li, New York City College of Technology; Ali Setoodehnia, ECPI University


ENG 205:
Topics in Automotive Technologies
Session Chair: Kevin Dittman (Purdue University)
Time and Place: Monday, November 7, 2016, 2:00—3:45pm Cypress 3

Paper #010
Evaluating the Fidelity of a Scale Model Hexapod Motion Simulator
Christopher Lawrence, Indiana University Purdue University Indianapolis; Andrew Borme, Indiana Universit Purdue University Indianapolis; Pete Hylton, Indiana University Purdue University Indianapolis

Paper #026
Gate Drive and Efficiency Analysis for a Silicon Carbide MOSFET-Based Electric Motor Drive
Todd Batzel, Pennsylvania State University-Altoona; Taylor Leach, Pennsylvania State University-Altoona

Paper #109
Towards the Improvement of Highway-Rail Intersections with an Intelligent Grade Crossing System
Osileke Osipitan, New York State Department of Transportation

Abstract #168
Early Warning Defect Analysis and Reporting: A Need for Analysis and Reporting Improvement
Christopher Kluse, Bowling Green State University


ENG 206:
Topics in Robotics
Session Chair: Suzanne Keilson (Loyola University Maryland)
Time and Place: Monday, November 7, 2016, 4:00—6:00pm Cypress 3

Paper #033
Wireless Control of a Robotic Arm Using 3D Motion Tracking Sensors and Artificial Neural Networks
Fernando Rios, Georgia Southern University; Imani Augusma, Georgia Southern University; Rocio Alba-Flores, Georgia Southern University

Paper #048
Statistical Sampling Strategy for Pipeline CCTV Inspection
Myungjin Chae, Central Connecticut State University

Abstract #052
Evaluation of Intelligent Controllers for Improving Elevator Energy Efficiency
Muhammad Hasan, Texas A&M International University; Rainer Fink, Texas A&M University; Muthuvel Suyambu, Texas A&M University


ENG 207:
Topics in Wastewater and Properties of Fluids
Session Chair: Sanjay Tewari (Louisiana Tech University)
Time and Place: Tuesday, November 8, 2016, 8:30—10:15am Cypress 3
Paper #004
Study of the Role of Adhesive Forces During Liquid-Mediated Contacts Separation
Prabin Dhital, Minnesota State University—Mankato; Shaobiao Cai, Minnesota State University—Mankato

Paper #045
Modelling Fluid Flow Through a Flexible Tube
Abdessamad Mehdari, Mohammed V University; Mohamed Hasnaoui, Royal Air Force School; Mohamed Agouzoul, Mohammed V University

Abstract #170
Emerging Water Contaminants: Assessment of Sources, Associated Risk and Options for Treatment Methods
Sanjay Tewari, Louisiana Tech University; Ashique Ahmed, Louisiana Tech University

SPONSORS